# --- Network configuration
# Give a different name to each PC
# NET_HOSTNAME=MyThinclient
# We are using a cd based system so we don't use tftp server for config
NET_FILE_ENABLED=Off
# If you want to use a DHCP server, comment out these params:
#NET_USE_DHCP=Off
#NET_IP_ADDRESS=192.168.0.70
#NET_MASK=255.255.255.0
#NET_GATEWAY=192.168.0.1
#NET_DNS1=192.168.0.1
#NET_DNS2=192.168.0.21
#NET_DNS_SEARCH=cartoons.org.nz
# --- Session Options
#
# Note: # is a number equal to or greater than 0
#
# SESSION_#_TITLE Title description for SESSION. Needed for replimenu.
# SESSION_#_TYPE Package type, choose beetwen:
# - vncviewer Start vncviewer in X
# - rdesktop Start rdesktop in X
# - x Start x-terminal session (xdm)
# - ssh Start ssh client in linux console
# - telnet Start telnet client in linux console
# - ica Start Citrix ICA client in X
# - tn5250 Start AS400 client in linux console
# SESSION_#_SCREEN Display number to run the X server on
# SESSION_#_AUTOSTART ON Application will be executed immediately at startup
# OFF Application will appear in a menu to be started manually
# SESSION_#_WORKSPACE Workspace to run program on in a window manager
# SESSION_#_type_SERVER IP address/hostname of the server
# SESSION_#_type_OPTIONS Command line options for the session type
# Individual Session Settings, override defaults
#
# IMPORTANT: Make sure you minimum have a SESSION_0. Otherwise you will get an error
# on boot. You may have additional sessions: SESSION_1, SESSION_2 ...
# SESSION_0 is on ctrl-alt-F3
# SESSION_1 is on ctrl-alt-F4
# ... etc.
# If you only have one session, it is a good idea to uncomment this line:
AUTOSTART=On
# Typical Windows 2000 session
#SESSION_0_TITLE="Windows 2000 terminal server"
#SESSION_0_TYPE=rdesktop
#SESSION_0_RDESKTOP_SERVER=192.168.1.1
#SESSION_0_RDESKTOP_OPTIONS="-u 'fred'"
#SESSION_0_TITLE="NewCitrixServer"
#SESSION_0_TYPE=ica
#SESSION_0_ICA_SERVER=xxx.xxx.org.uk
# Important: don't insert spaces in the session title
# ica.xxx.org.uk is a dns round robin address for all citrix servers in farm
SESSION_0_TITLE="CitrixServerAppDesktop"
SESSION_0_TYPE=ica
SESSION_0_ICA_APPLICATION_SET="Desktop"
SESSION_0_ICA_SERVER=ica.xxx.org.uk
# Typical Windows 2003 Server session, with True-color and sound redirection
# Note: use '-a 16' and '-a 24' to get true-color with Windows 2003+
# Older servers don't support these color depths, wrong settings may cause connection to fail.
#SESSION_1_TITLE="Windows 2003 terminal server (16 bit color depth)"
#SESSION_1_TYPE=rdesktop
#SESSION_1_RDESKTOP_SERVER=192.168.1.1
#SESSION_1_RDESKTOP_OPTIONS="-u user -p password -a 16 –r sound"
#Example on USB Printer Redirection for Rdesktop
#SESSION_#_RDESKTOP_OPTIONS="-r printer:usb='DYMO LabelWriter 400 Turbo'"
# Important: don't insert spaces in the session title
#SESSION_0_TITLE="CitrixServer"
#SESSION_0_TYPE=ica
#SESSION_0_ICA_APPLICATION_SET="Microsoft Word"
#SESSION_0_ICA_OPTIONS="-username donald -password qwak"
# ICA: Instead of connecting to an "application set",
# you can directly connect to a specific server desktop
# Important: don't insert spaces in the session title
#SESSION_3_TITLE="CitrixServer"
#SESSION_3_TYPE=ica
#SESSION_3_ICA_SERVER=ICA
#SESSION_#_TITLE="Unix server"
#SESSION_#_TYPE=x
#SESSION_#_X_SERVER=192.168.1.2
# Default is '-query'
##SESSION_#_X_OPTIONS="-indirect"
# You should set also "SCREEN_X_FONT_SERVER", below
#SESSION_#_TITLE="VNC server"
#SESSION_#_TYPE=vncviewer
#SESSION_#_VNCVIEWER_SERVER=192.168.1.2
#SESSION_#_TITLE="Telnet server"
#SESSION_#_TYPE=telnet
#SESSION_#_TELNET_SERVER=192.168.1.2
#SESSION_#_TITLE="SSH server"
#SESSION_#_TYPE=ssh
#SESSION_#_SSH_SERVER=192.168.1.2
#SESSION_#_TITLE="AS400 server"
#SESSION_#_TYPE=tn5250
#SESSION_#_TN5250_SERVER=192.168.1.2
# Use this option to specify keyboard map
#SESSION_#_TN5250_OPTIONS="map=280"
# Other options
#SESSION_#_TN5250_OPTIONS="env.DEVNAME=JDevBox1 +underscores env.TERM=IBM-3477-FC"
# --- General Options
#
# AUDIO_LEVEL Audio Level for sound, 0-100
# KEYBOARD_MAP Keyboard layout
# TIME_ZONE Used to set time zone on TS client by entering the UTC offset.
# This can be set automatically if the appropriate dhcpc option is selected
# (Option 2, time offset in seconds)
# RECONNECT_PROMPT This displays the reconnection/shutdown options for when a session is ended
#
# OFF No reconnect prompt
# ON Reconnect prompt will be displayed
# MENU Shows a menu with a shutdown and reconnection option
# MENUXX As MENU option, but the XX is a time period in minutes.
# After XX minutes shutdown will occur unless the reconnect option
# is choosen
AUDIO_LEVEL=67
# Look inside BuildFiles\build.conf* file for a list of the supported KB layouts
# important to change the keyboard map / timezone to your local settings else time is wrong in the session. Reconnect set to "Shutdown or Reconnect"
KEYBOARD_MAP=en_gb
#TIME_ZONE="UTC-00:00"
TIME_ZONE="GMT+0BST,M3.5.0,M10.5.0"
RECONNECT_PROMPT=MENU01
# --- X Server Options
#
# SCREEN_RESOLUTION Screen resolutions available in the workstations
# SCREEN_COLOR_DEPTH Number of bits per pixel (8,16,24)
# SCREEN_HORIZSYNC Monitor horizontal sync frequency in Khz.
# If left blank Xorg will try to detect with DDC
# SCREEN_VERTREFRESH Monitor vertical refresh frecuency in Hz.
# If left blank Xorg will try to detect with DDC
# SCREEN_X_FONT_SERVER IP address or hostname of the font server for X
#
# Screen Saver Settings
# SCREEN_BLANK_TIME Minutes to X session goes blank
# SCREEN_STANDBY_TIME Minutes to X session goes into standby mode
# SCREEN_SUSPEND_TIME Minutes to X session goes into suspend mode
# SCREEN_OFF_TIME Minutes to X session turn off
#
# MOUSE_PROTOCOL Mouse protocol type (Microsoft, PS/2, etc.)
# (mouse is autodetected, use this only if it fails)
# MOUSE_DEVICE Mouse device: /dev/ttyS0 -> COM1
# /dev/ttyS1 -> COM2
# /dev/ttyS2 -> COM3
# /dev/ttyS3 -> COM4
# /dev/psaux -> PS/2 mouse port
# /dev/input/mice -> USB mouse (needs USB package)
# MOUSE_RESOLUTION Mouse resolution
# MOUSE_ACCELERATION Mouse acceleration
# X_NUMLOCK Set numlock state on boot
# X_COOKIE Will set X Cookie if specified
#SCREEN_RESOLUTION="800x600"
SCREEN_RESOLUTION="1024x768"
SCREEN_COLOR_DEPTH="24"
#SCREEN_HORIZSYNC="30-64"
#SCREEN_VERTREFRESH="56-87"
#SCREEN_X_FONT_SERVER=192.168.1.2:7100
SCREEN_BLANK_TIME=10
SCREEN_STANDBY_TIME=20
SCREEN_SUSPEND_TIME=30
SCREEN_OFF_TIME=60
# Mouse acceleration: We found in testing that the speed of the cursor was much slower that fat clients so we added following options to try and speed it up.
#MOUSE_PROTOCOL=PS/2
MOUSE_PROTOCOL=IMPS/2
#MOUSE_DEVICE=/dev/psaux
#MOUSE_RESOLUTION=100
#X_NUMLOCK=Off
MOUSE_ACCELERATION=1/8
#X_COOKIE=36d71ab65c10ef065702c111a3d31593
# --- Citrix ICA Specific Options
#
# GLOBAL Settings
#ICA_USE_SERVER_KEYBOARD Use default server keyboard, otherwise use KEYBOARD_MAP
# variable
#ICA_BROWSER_PROTOCOL Broswer protocol, can be HTTPonTCP or UDP
#
# APPLICATION SET settings
#ICA_ENCRYPTION Encryption level for ICA
# Valid Settings Below
# "Basic"
# "RC5 (128 bit - Login Only)"
# "RC5 (40 bit)"
# "RC5 (128 bit)"
# "RC5 (56 bit)"
#ICA_COMPRESS Compression, On/Off
#ICA_AUDIO Audio, On/Off
#ICA_AUDIO_QUALITY Audio Quality, Low, Medium, High
#ICA_PRINTER This will turn on ICA autocreate printers, see printer section
# for details, On/Off
#
# NOTE: You must have the lpr package included for this option
# to work.
#
#ICA_APPLICATION_SET Published Application (Not needed if using
# ICA_SERVER)
#ICA_SERVER Server to Connect to (Not needed if using
# ICA_APPLICATION_SET, but needed if the ICA-Masterbrowser
# is not on the local network.)
#ICA_WFCLIENT_type_specific This allows you to specify specific config file details for global ica
# parameters any parameter can be changed with this setting. An example of this is
# ICA_WFCLIENT_CLIENTDRIVE="On"
# See your application manual for documentation on the settings which
# can be used.
#ICA_USE_SERVER_KEYBOARD=Off
ICA_BROWSER_PROTOCOL=HTTPonTCP
#ICA_SERVER=
#ICA_ENCRYPTION=Basic
#ICA_COMPRESS=On
#ICA_AUDIO=On
#ICA_AUDIO_QUALITY=Low
#ICA_PRINTER=off
#ICA_SEAMLESS_WINDOW=Off
# --- LP Server Printing Options
#
# PRINTER_0_NAME Workstation Printer Name, Can be Any Valid Name
# If you have turned ICA_PRINTER=ON then this is the
# name of the printer driver
# PRINTER_0_DEVICE Workstation printer device (if not specified devices
# are not loaded).
# /dev/printers/[0-2] for parallel ports
# /dev/ttyS[0-3] for serial ports
# /dev/usb/lp[0-2] for USB printers
#
# PRINTER_0_TYPE P for parallel, S for serial, U for USB printer
# PRINTER_0_OPTIONS Serial port options.
# PRINTER_1_* See PRINTER_0_*
# PRINTER_2_* See PRINTER_0_*
# PRINTER_3_* See PRINTER_0_*
#PRINTER_0_NAME="parallel"
#PRINTER_0_DEVICE=/dev/printers/0126
#PRINTER_0_TYPE=P
#PRINTER_1_NAME="serial"
#PRINTER_1_DEVICE=/dev/ttyS1
#PRINTER_1_TYPE=S
#PRINTER_1_OPTIONS="speed 38400 -imaxbel"
#PRINTER_2_NAME="usb"
#PRINTER_2_DEVICE=/dev/usb/lp0
#PRINTER_2_TYPE=U
#ICA Autocreate Printer Example
# Local printers can be a bit hit and miss (better with parallel printers).
# Must give thinstation computer a static ip address on dhcp server then
# install printer on print server with static ip address and correct drivers
# and finally change the port in printer settings from
# 9100 to 9101 ONLY IF printer is usb.
PRINTER_0_NAME="parallel"
PRINTER_0_DEVICE=/dev/printers/0
PRINTER_0_TYPE=P
PRINTER_1_NAME="usb"
PRINTER_1_DEVICE=/dev/usb/lp0
PRINTER_1_TYPE=U
Thinstations configuration can be a bit daunting initially but once you get the hang of it, it mostly makes sense.
Please send me your comments or questions.
9 comments:
Hey,
Just a quick question, maybe you will be able to help me.
Im building the ISO from a linux machine, but to me is uncertain where to put this conf file. Do I need to put it in the root level of the thinstation folder? eg. the same level as the build script is?
Hello Maritoxs,
I have just checked on our Linux build machine and you do have to put both conf files ('build.conf' and 'thinstation.conf.buildtime'
).
Sample conf files should already be in the top level of the thinstation folder.
Hope this helps
Hello Sony,
Great to hear from you. Thank you so much.
The issue is more related to the thinstation.conf.user
in .conf.buildtime you have the option to say on which partition the profile is gonna be. But my plan is to install this onto a usb stick or a hdd, and deploy it on dozens of computers, however i dont wanna create different iso' s for all the different partition' s name: e.g. /dev/sda /dev/hda .
Is there anyway to copy the conf.user file to the root of the iso and use it from there?
Hello Maritoxs,
I am not sure how to accomplish what you require but i would suggest that you go down the route of PXE booting if you are deploying to many computers. This will save on discs, make config changes much easier and also get around the partition issue.
We have one image that works on 99.9% of all clients that boot through PXE boot.
I originally thought that setting up a PXE boot server was quite scary but in the end it was quite straight forward.
I am in the process of writing a complete Thinstation / PXE boot tutorial so watch this space for further details.
Hope this helps
Hi guys,
I need little help on configuring live disk or install on disk. I am trying to auto run vmview client. During boot i am getting "No vaild session type" error. any suggestions.
Thank you
http://www.uco.es/servicios/informatica/sistemas/doc_ccc/ThinStation/ThinstationEnLaUCO.pdf
Hi folks, need badly your assistance. I managed to startup a VM from thinstation devimage but dont know how to proceed (literally). My goal is to starup via CDROM (for now) however, i am really lost on the documentation via Thinstation website.
I am really hoping someone can provide me some instructions (idiot proof will do :)).
Thank you.
dù rằng còn hơn 1 tháng nữa mới tới Tết Nguyên đán 2017 nhưng tại Hà Nội, phổ thông cây đào bích, đào phai đã sớm khoe sắc trên gian phoi do thong minh.
Vừa sắm cành đào phai tại chợ hoa PR, bà Nguyễn Thị Liên (51 tuổi, P.Bạch Mai, Q.Hai Bà Trưng) chia sẻ: “Tôi tậu cành đào phai giá 160.000 đồng. Năm nào vợ chồng tôi cũng đánh xe lên chợ này tìm cành đào về đón rằm tháng Chạp và Tết Dương lịch”.
Post a Comment